conventional mount

[Western22288]

ok i have a 1992? western conventional mount on my 1993 ford f-250. the plow is of and f-350 and hangs very low. i think i read sumwhere that the f-250 and f-350 under carrage was little bit different. that f-350 hangs lower. is this the case? if so id like to swap my f350 for and f250 and anybody has one for sale or trade?

[sonjaab]

Western....................Go to the Western plow web site and use the
plow selector. If the #s match between the 250 to 350 then I would
assume the old style hard mount would be the same and fit both.

[Jerre Heyer]

Most of the Old style Western mounts had several mounting holes in the drop piece on the front. If after Adjusting / lifting the push bar up to get 11-12" to the center of the holes for the plow ears you can't hit any holes in the drop piece you will need to drill new holes or find a different drop piece.

It's a common practice to pull the frame off in 1 or 2 pieces and try to put it on the next truck. This will work sometimes but there are adjustment holes in them for a reason.

Feel free to call if you have any questions. Jerre