isolation module location

[Ford850]

I just finish installing my western plow on my 2000 Ford F.250 diesel. I temporally mounted the isolation module in front of the driver side battery. I' am having a hard time finding a good location to mount the module where it wont be in the way of anything. If you a diesel F.250 can you tell me where you mounted yours?

[Crash935]

Its hard to find a good location in pretty much any of these trucks.

I usually wire tie the iso box to the factory harness that runs along the top of the fire wall just to the side of the brake booster with the wires hanging in a downward position. Another spot is to velcro kit it to the top of the fuse box cover under the hood.

[CT18fireman]

I almost always go on top of the fuse box. Leave a bit of slack in your wires so that you can still get to the fuses.

[Arc Burn]

Originally posted by CT18fireman
I almost always go on top of the fuse box. Leave a bit of slack in your wires so that you can still get to the fuses.

Yup:nodd