What can you tell me about this plow... (pics)

[EZSnow]

Alright, I have little knowledge about boss plows, but my B-I-L has a line on this plow- cheap, and has an F-350... you can probbly figure out the rest.

Anyway, it looks like something major happened to this plow. Any of you have some rough idea about what it might cost to get his truck rigged up for it and get it repaired? Are there different series of boss plows- one better than others?

Here's the big damage:

[EZSnow]

2

[EZSnow]

3

[EZSnow]

4

[EZSnow]

center shoe- remarkably intact

[EZSnow]

6

[EZSnow]

7

[EZSnow]

8

[EZSnow]

Last one. It looks like collision damage- I can't tell for sure. The truck is a 2004 Harley F-350- 6.0, Torque-Shift, Crew Cab, Short Box. The front valance would have to be removed/ trimmed, but other than that it should be the same as a regular 350.

Whaddya think? And whats a fair offer?

[CT18fireman]

I do not know Boss Plows that well. However that mainly looks like the A-frame is damaged. That would be a relatively easy part to purchase and replace. I think they would run around $300. It may be possible to repair the part, I can't tell from the pictures.

I would make sure that the blade wings are straight as well as the rest of the frame and that the pump works.

Make him a low offer and go from there.

[John DiMartino]

Whats the truck side mount look like? It must have gotten hit HARD to break that a frame.Check the wings,and center pin area real good,as well as the truck mount,and hydro cylinders. i dont think its worth to much as it sits,i figure 500 bucks-may closer to 1000 if everything is good.

[synner]

www.bossplows.com

http://img.photobucket.com/albums/v114/synner/bossplow.jpg


Part Number PFR07678
Description PUSHFRAME ASSY 10'V

http://img.photobucket.com/albums/v114/synner/bossframe.gif

not sure if that one is a smart hitch, hopefully that helps. :canada

[EZSnow]

Originally posted by John DiMartino
Whats the truck side mount look like? It must have gotten hit HARD to break that a frame.

There is NO truck-side equipment for sale with the plow.

[EZSnow]

Forgot pic 9
Is the lift tower disconnected from the a-frame, or is it tweaked that far?:eek:

[sdpsd99]

Looks like the lift tower is un pined from A frame. Also looks like it took an angular impact. Center Pivot pin and all hinge welds should be inspected for cracks. The pin from A frame that conects it to the Main hinge shoud be checked also. what size is it also?