Ohiosnow
03-18-2004, 07:42 AM
I was out plowing Tuesday night (10" of heavy snow) when it it stopped angling :confused: it started angling slowly then it stopped & started & then stopped completely :rolleyes:
I thought this $ucks but checked fluid level,OK
Could hear coil valve but no angle movement
then I pulled the cover off the pump housing to check for loose wires, none :confused:
But when I grabbed the angle coils & they moved ;)
I tightened the end nut(3/4") & it now angles so back to plowing! in less than 15 mins.
So if your BOSS stops angling or going up& down check the end nut on the coils ;) a very easy fix ;)
I thought this $ucks but checked fluid level,OK
Could hear coil valve but no angle movement
then I pulled the cover off the pump housing to check for loose wires, none :confused:
But when I grabbed the angle coils & they moved ;)
I tightened the end nut(3/4") & it now angles so back to plowing! in less than 15 mins.
So if your BOSS stops angling or going up& down check the end nut on the coils ;) a very easy fix ;)