PDA

View Full Version : angle ram rebuild???


mopar2256
02-18-2011, 08:53 AM
Got old rams apart and ordered new seals, question is that old ones are in such bad shape I cannot tell how many or how they get reinstalled.Looked all over and cannot find a breakdown. Anyone got pict's? What I got with seal kit is nut seal A plastic yellow seal,2 white plastic seals coned, 3 packings coned, with a flat black hard rubber? seal. thanks, Nate

DLCS
02-18-2011, 09:41 AM
maybe this will help. http://ww2.meyerproducts.com/upload/forms/1-533%20R2%20Angling%20Rams%20.pdf

wild bill
02-18-2011, 06:49 PM
there should be a top and bottom adaptor any nylon or cotton duct packings get put in the middle .1 plastic 1 cotton duct and so on ,install the packings with the vee up ^ .

mopar2256
02-20-2011, 07:12 AM
2 different style cly. seals in kit. Yellow was the nut seal white plastic on top then 3 black leathers then 1 white plastic then either of the flat hard black plastic depending on style cly. had in it previously on the bottom.Nate