PDA

View Full Version : 2008 Tacoma with Meyer Drive Pro Plow


Chuck Smith
09-17-2010, 10:20 PM
Finished this up today.

~Chuck

Plow Dak
09-18-2010, 02:37 PM
Looks a lot better than the Homesteaders I've put on these trucks.

Chuck Smith
09-19-2010, 08:06 PM
Almost sent you a PM on this one Mike. The Automatic Raise / Automatic Lower mode needs a reverse signal to work. NO fuse for reverse lights on these??? Thank God for forums, I found a place to tap in on another forum. The Tacoma and Drive Pro are a great combination.

~Chuck

Chuck Smith
09-20-2010, 07:18 PM
Finished another one today. This one is an 09 Extended Cab TRD Off Road. The 08 was a 4 door TRD Sport.

~Chuck

Plow Dak
09-21-2010, 05:16 PM
Almost sent you a PM on this one Mike. The Automatic Raise / Automatic Lower mode needs a reverse signal to work. NO fuse for reverse lights on these??? Thank God for forums, I found a place to tap in on another forum. The Tacoma and Drive Pro are a great combination.

~Chuck

Yea they don't make things to obvious. They combine different unrelated circuits into each other.

Like backup lights and gauges. But only for the feed Go figure.

Early Chrysler vans would air bag and rear wiper on the same circuit.
blow the rear wiper fuse and the airbag light would come on.

Engineers are smart but lack common sense at times.
Glad you were able to tap in.

Western22288
02-14-2011, 12:41 PM
hey chuck my father picked up a 2002 nissan frontier crew cab long bed 4x4 today. ever install a drive pro on one? howd it do?

Western22288
03-05-2011, 03:32 AM
so i guess u havent?

Chuck Smith
03-05-2011, 08:44 PM
Nope, no Nissans at all. Sorry.

~Chuck