I need a Yoke ASAP

[wyldman]

I need a front axle input yoke for my 77 Jimmy,the yoke where the front driveshaft connects to the front axle.It's a GM 10 bolt.

One of the tabs that locates the u-joint is busted off,and it keeps chucking the cap off the u-joint.I've welded a washer onto the retaining strap as a temporary fix,but would like to put another yoke on it.

Any one got one lying around ?

[paulsoccodato]

i might, i have to look.

i know i have a spare front shaft for a 10 bolt.

ill look tomorrow, and get back to you.

[towman]

would a 1980 blazer have the same yoke you would need? i have one for parts, will check when i get to work in the am to see if it is a 10 bolt or not Jay

[wyldman]

Yes,the 80 Blazer will have a 10 bolt.

It's the yoke on the diff I need,not on the driveshaft.

[Tileman]

Would a 1/2 ton dana 44 yoke work.
(1977 model)

Have one if it would help.


Tileman

[Tileman]

Will a GM 10 bolt rear be the same as the front. (1977 model)



Tileman


if so PM me Chris

[wyldman]

Problem solved. :D

Towman dug one up,and rushed off after work to get it to the UPS office that night.Even took the trouble to call me personally and let me know.

Many thanks,good deeds do not go unrewarded.

Thanks to all who took the time to respond.

[wyldman]

Yoke showed up this morning,just in time for the big storm.

Thanks again Towman !

[towman]

i sure hope it is the right one with all the snow we are getting on the east coast right now, let me know Chis