Help

[fireresqdog]

help
hey does anyone have mounting instructions for a meyer plow frame to a 1986 chevy k20 pick up if so please help!! It jus does not make sence to me( i dont have instructions) pics might help!!

or can someone take a pic of any 73-87 meyer mount so i can see how this darn thing mounts!!



chris

[Chuck Smith]

Chris... I have an 80 GMC. Unfortunately, I do not have it here to take pics. The mount is pretty simple though. There are two braces that go back into the wheel wells and attach to the frame. The front bumper comes off, and the headgear mounts on top of the frame ends. Let me look for some pics.

~Chuck

[Crash935]

A quick tip----check the location of the fuel and brake lines inside the frame rail before you drill the holes for the thrust arms.

[fireresqdog]

this is what i have in addition to the head gaer i get the top part but i dont get the bottom part!!

chris

[Chuck Smith]

Chris, I found two so far. This one is not so great, but you can see the bolt goes through the back hole in the lift arm, and you can see how the bumper mounts in front of the plow frame.

~Chuck

[Chuck Smith]

IF that is all you got, then you are missing pieces.

You can see the bottom mount here.

~Chuck

[fireresqdog]

does it look like im missing something?

chris

[fireresqdog]

the other part is still mounted to the plow i meant just the truck side. basically i just need to know what goes from the right side of you pic back to where it meats the truck

chris

[Chuck Smith]

You are missing at least two brackets for each side that I can tell so far. Man I wish the truck was here. I even have the original installation instructions at my Mother's house. :headwall

Let me keep looking. I have a lot to go through on my computer...

~Chuck

[fireresqdog]

this should sum up my delimma

chris

[Chuck Smith]

I just searched over at eBay. I found this pic of an older Jeep mount. It is VERY similar to what you need.

~Chuck

[fireresqdog]

luckaly i have an olde mount to a dodge with the two additional pieces, hopefully i can make them work. if you have any suggestions thay will help alot!!

chris

[fireresqdog]

well i got the insalation instructions from meyer the only thing is can someone tell me the legnth of arms (see pic)


thanx chris

[Tileman]

this is right hand side of truck (passanger side)








Tileman

[Tileman]

this is the front

Tileman

[Tileman]

front again

[Tileman]

Left side (driver) this is the back up truck,1978 Chevy k10 we just installed mount over the weekend.

Tileman

[Tileman]

here are some more this is right side (passanger** of or 1979 K10

[Tileman]

front of 79 with plow

[fireresqdog]

thank you so much for the help!!will definatly help alot

chris

[andrewcanada]

The pictures were nice, noticed the 5 leafs on the '79. WOW. I just got through putting four on my '83 1/2 ton shortbox. I thought about the 5 option, but I'd already overdone it with overarched 7's (1ton) at the rear! The 7/16(?) bolts at the rear have got to be a weak point. Your efforts are not unoticed. Andrew :)