MMI or MMII? ID this plow please

[BrockwayMT]

I found this plow listed for sale. They say it came from a 2004 GM 1500 and will fit 02-05 GM. I think the moldboard and maybe the headgear too are much older. I think only his push plates are 2004. Help would be appreciated.

http://img.photobucket.com/albums/v67/bigdannyk66/4b05_1.jpg

[BWhite]

Looks like a MMI

[wyldman]

It's a Minute Mount I.

[azumakitlawncare]

And by the looks of the rust id say its about 5 years old maybe 6!!

[BrockwayMT]

Thanks for the help. Are the MM2 mounts (as I am sure his 04 mounts are) completely reverse compatible with a MMI plow. I.e. does a MM1 plow fit and work properly on push plates made for a MM2?

[Snowboy]

It's the same. MM2 is just supposed to be easier to get on and off the truck. MM1 has 2 pins you need to pull out on either side of the truck. MM2 while it has 2 pins you do not need to go over to the other side to pull them out, you have a handle that pulls them out for you. Just a convenience factor or something to break on you.

That blade looks the same as your ebay find. Mine is a 96 but with a little less rust. Gets the job done and got it for a good price and if it craps out I have a back up one I can get for free.

MM2
Step 1
http://www.fisherplows.com/images/spfeatures_step1.jpg
2
http://www.fisherplows.com/images/spfeatures_step2.jpg
3
http://www.fisherplows.com/images/spfeatures_step3.jpg
4
http://www.fisherplows.com/images/spfeatures_step4.jpg

[BWhite]

That mold board could be a 97 . Fisher was sent a batch of out of spec steel and the powdercoat would not stick to the steel .
There really isnt much that would break with the MMII I wouldnt worry about that .

[Joe92GT]

I don't know if they call it generations, but I would say thats a second generation MM 1. It has the insta-act pump instead of the SEHP? (western unimount style) pump, but it has the old mold board design. The newer minute mount 1's have a different center pivot and a-frame design. I would call them the third generation. Right after those came the mm2's.

Joe

[Big Dog D]

It probably came off of an 04 that was out for the tail end of 03. The paint problem they had in 97 was a problem with the steel being treated and the paint just fell/flaked off rather than rusted off like the one in that picture. The rust is consistent with a plow that was never washed after use. Most of the rust is right where the majority of the roadspray gets whipped up by the front wheels.