Ratchet Tiedown Straps

[Garagekeeper]

Ratchet tiedown straps are in stock again...
I have had a few differant styles of quality "USA Made" Ratchet straps constructed by one of the largest manufacturer of aircraft tiedowns.

They come in three differant styles, 1"x10" with s-hooks,1"x10' with a wire hook and a sliding "D" ring, and 1"x12' continous loop. All have H.D. ratchets $6.75 each
These are not the "cheapies" that are sold at home centers or online.

Also in stock are 2"x8' car and equipment ratchet tiedowns with axle loop and protective sleeve one the one end. $22.50 each

Available in safety yellow, in stock and ready for pick up or shipping.

So if you want a quality tiedown for your bike, blowers, mowers, salters etc I have them. Custom lengths are available.


Please e-mail or call for any additional information....
:rolleyes: John...

[snowjoker]

I can vouch for these straps they are very well made and worth more than the price....... Once you get a couple you will never know how ya did without them...........

[snowplowjay]

I need (2) of the first style and (2) of the second style please John!!!

:D

Ill be contacting you today for an order!!!


Jay

[Rocket]

What are the weight limits on these?

[Garagekeeper]

The first tiedown strap with the "S" hooks have a 1,200 lbs assembly breaking strength and a working load limlt of 400 lbs.
The second tiedown strap with the wire hooks and floating "D" rings have a 1,320 lbs assembly strength and working load limit of 440 lbs.
The third tiedown strap has a continuious loop with a 2,500 assembly strength and a working load limit of 800 lbs.
The 1" webbing used on all three have a 3,500 rating.
The 2" equipment tiedowns have a breaking strength of 10,000 lbs and working load limit of 3,333 lbs.

:rolleyes: John...

[Jeff D.]

John, here's a pic of the "snap hook" end I was refering too in the PM.
(I couldn't post a pic of it in the PM):beatsme

[Earthscapes]

John can you get the one's that Jeff posted a pic of ? If so I need 4 to hold my salter in.

Keith

[Garagekeeper]

Sure can Keith. Watch for an email.
:rolleyes: John...

[Pickering Snow]

John

Can you get wheel lift straps for the wreckers , i lost a few sets in Oct on a trip and need to replace would rather buy them from you than Aw Direct.

Two kinds i use 1 is the standard bridle for wheel lifts the second is similar but they have a 4 inch chain at the end of the rachet to hit my hold down pockets on the carriers . Color pref isnt important.

[snowplowjay]

Since this thread is active again I wanted to just let everyone who is considering these straps to know that they are well worth it. I have 4 of them in my personal pickup and I am using them all the time and they are very well built units!!!

Thanks John


Jay

[Garagekeeper]

Thought I would bring this back up.. Ratchet Tie downs are in stock and ready to ship.
You can never have enough "quality" straps to hold your stuff down.
:rolleyes: John...