Help!

[jcohen]

Hey Guys!

Was about to finally remove the plow and...
It is stuck! angled all the way to the left and wont move.

I can see that there is a reaction in the lines when i thuch the controler but it seems like something is holding it in that angle.

I have an E-47 pump (two years old- didnt do problems this season LOL- Had to wait for the last day...)

Any ideas?

Thanx-

Johnny

[Jerre Heyer]

Either of several problems. C valve ( green wire) is not getting power or not activating with power, Quick coupler for hoses un done or not all the way together.

Check the in cab control plug to make sure it's plugged all the way in. Check the plugs for the plow also. IF this is a newer style meyers with the large single plug it may not be making full contact. Clean + check the plug for connection. Jerre

[cardoctor]

when mine does that i put it against a telephone pole . sound like the rams stuck.


john

[SkykingHD]

Look to see if the problem is Hyd or mechanical. When a Meyer plow gets the aframe to plow sector holes oblonged due to wear the plow can bind. Look to see if the plow sector is away from the a frame bracket. If it is you will have to repair that problem.

Dave