hammiam
12-18-2005, 06:44 PM
Please help me! I can't figure this one out. On my E-60, When I angle all the way to the right, it locks up. I can't angle left again. If I remember not to go all the way to the stop and I do stop short, it will angle back to the just fine. I have replaced the "c" cartridge and solenoid. I have replaced both hoses. I have disconnected the angle cylinders and moved the blade by hand back and forth to the right and left. No problem. I have removed the pilot check valve and inspected it. It was OK. When this problem occurs, I have found out that the left cylinder stays pressurized. If I bleed pressure off the left hose, I can push the plow to the left a little and then the pump will move it when I activate the switch. Does anyone have any ideas? Thanks in advance.