Adding hyro fluid/e47

[DBDigger]

Hello folks...I'm new at plowing and have a Meyer E-47....My question is can I add some hydrulic fluid to the pump without bleedng the system or do I have to bleed the system everytime I open the filler plug?????Thanks

[Garagekeeper]

Nope just remove the filler plug and fill it up.
" Welcome to the site DBDigger".
:rolleyes: John............

[bam]

remember to check the fluid with the ram down. when "full" the fluid should be about an inch below the cap.

[AL Inc]

Just flushed and re-filled my E-47 and plow today. I followed Chuck's directions and it was no problem. Like bam said, the service manual said about 1"-1 1/2" from the top. Thanks, Chuck and everybody for all the useful information here.:drinkup Mike

[BRL]

Welcome to SC.com DB!

You might find this site useful as well, it's the one AL Inc is referring to:
http://www.snowplowing-contractors.com/

[DBDigger]

Thanks for the help everyone... it's been a huge help....DB