PDA

View Full Version : snoway power down


scott21
12-15-2003, 01:07 PM
On my snoway power down plow when I flip the switch it goes up
instead of down .

Scott

Alan
12-15-2003, 03:09 PM
I'm running on a fuzzy brain right now, too many hours behind the wheel today. Check all the wire connections onto various solenoids under the power pack cover. Seems like it's either a valve not getting signal or a stuck valve that is not opening to let pressure to the down side of the lift cylinder.

If you drop the plow and then engage downpressure does it work alright?

AL Inc
12-15-2003, 05:19 PM
Scott, I had the same problem on my SnoWay, it was just a loose connection. Hit the swich for DP, and the plow would go up, hit the switch to turn it off, the plow dropped.